Name : nrf51
Flash : 257 kB
Flash bank : 0x40000 Bytes @ 0x0
Flash bank : 0x400 Bytes @ 0x10001000
RAM : 16 kB
RAM : 0x00004000 Bytes @ 0x00004000
description : nRF51 reference description for radio MCU with ARM 32-bit Cortex-M0 Microcontroller at 16MHz CPU clock
Architecture : ARM Cortex-M0 (CM0)
revision : r3p1
endian : little
Number of relevant bits in Interrupt priority : 2
name : AAR
description : Accelerated Address Resolver.
base address : 0x0
Interrupt (15) CCM_AAR
name : ADC
description : Analog to digital converter.
base address : 0x0
Interrupt (7) ADC
name : CCM
description : AES CCM Mode Encryption.
base address : 0x0
Interrupt (15) CCM_AAR
name : CLOCK
description : Clock control.
base address : 0x0
Interrupt (0) POWER_CLOCK
name : ECB
description : AES ECB Mode Encryption.
base address : 0x0
Interrupt (14) ECB
name : FICR
description : Factory Information Configuration.
base address : 0x0
name : GPIO
description : General purpose input and output.
base address : 0x0
name : GPIOTE
description : GPIO tasks and events.
base address : 0x0
Interrupt (6) GPIOTE
name : LPCOMP
description : Low power comparator.
base address : 0x0
Interrupt (19) LPCOMP
name : MPU
description : Memory Protection Unit.
base address : 0x0
name : NVMC
description : Non Volatile Memory Controller.
base address : 0x0
name : POWER
description : Power Control.
base address : 0x0
Interrupt (0) POWER_CLOCK
name : PPI
description : PPI controller.
base address : 0x0
name : QDEC
description : Rotary decoder.
base address : 0x0
Interrupt (18) QDEC
name : RADIO
description : The radio.
base address : 0x0
Interrupt (1) RADIO
name : RNG
description : Random Number Generator.
base address : 0x0
Interrupt (13) RNG
name : RTC0
description : Real time counter 0.
base address : 0x0
Interrupt (11) RTC0
name : RTC1
description : Real time counter 1.
base address : 0x0
Interrupt (17) RTC1
name : SPI0
description : SPI master 0.
base address : 0x0
Interrupt (3) SPI0_TWI0
name : SPI1
description : SPI master 1.
base address : 0x0
Interrupt (4) SPI1_TWI1
name : SPIS1
description : SPI slave 1.
base address : 0x0
Interrupt (4) SPI1_TWI1
name : SWI
description : SW Interrupts.
base address : 0x0
Interrupt (20) SWI0
Interrupt (21) SWI1
Interrupt (22) SWI2
Interrupt (23) SWI3
Interrupt (24) SWI4
Interrupt (25) SWI5
name : TEMP
description : Temperature Sensor.
base address : 0x0
Interrupt (12) TEMP
name : TIMER0
description : Timer 0.
base address : 0x0
Interrupt (8) TIMER0
name : TIMER1
description : Timer 1.
base address : 0x0
Interrupt (9) TIMER1
name : TIMER2
description : Timer 2.
base address : 0x0
Interrupt (10) TIMER2
name : TWI0
description : Two-wire interface master 0.
base address : 0x0
Interrupt (3) SPI0_TWI0
name : TWI1
description : Two-wire interface master 1.
base address : 0x0
Interrupt (4) SPI1_TWI1
name : UART0
description : Universal Asynchronous Receiver/Transmitter.
base address : 0x0
Interrupt (2) UART0
name : UICR
description : User Information Configuration.
base address : 0x0
name : WDT
description : Watchdog Timer.
base address : 0x0
Interrupt (16) WDT
Is something missing? Is something wrong? can you help correct it ? Please contact us at info@chipselect.org !
This website is sponsored by Embeetle, an IDE designed from scratch for embedded software developers.